Skip to content
  • There are no suggestions because the search field is empty.

Using the AI Packing Function

Automatically calibrate your recipe parameters for consistent, accurate fills

What Is AI Packing?

The AI Packing function automatically calibrates the feed parameters of a recipe by analyzing a short run of consecutive bags. It's the fastest way to dial in a new or unfamiliar recipe — but once your parameters are stable, it should be turned off so the recipe runs consistently without further adjustment.

Before You Start: Setting Up Your Recipe

If you're using AI Packing on an existing recipe, simply select it from the main screen and skip to the next section.

If you're creating a new recipe, follow the How to Add a New Recipe guide, then apply these specific settings before running AI Pack:

  • Target weight — enter your actual target (e.g. 500g)
  • Fast Feed, Med Feed, Slow Feed — set all three to 1
  • For recipes under 1000g — set the Feed Speed mode to Two Speed (Med/Slow). This disables the Fast Feed stage, which is not suitable for weights under 1000g. 

Running the AI Pack Calibration

  1. Tap Recipe on the main screen and select the recipe you want to calibrate.
  2. Tap Shortcut to open the Shortcut page.
  3. Toggle AI Pack on.
  4. Ensure the hopper is full of coffee.
  5. Tap Start and run 7–10 consecutive bags without stopping. Interrupting the run mid-way will affect the calibration accuracy.
  6. Watch the output weights — once they stabilize and remain consistent bag after bag, the calibration is complete. This typically takes 7–10 bags.
  7. Tap Shortcut and toggle AI Pack off.

⚠️ Important: AI Pack is a calibration tool, not a permanent setting. Always turn it off once your target weights are stable. Leaving it on during normal production will cause the machine to keep adjusting parameters unnecessarily.