| Estimated Time | Up to 15 minutes |
|---|---|
| People Required | 1 |
| Difficulty | Easy |
| Tools Required | None |
Before You Begin
Want to fill a 10kg bucket, or something even bigger? Your Precision Fill can do it!
A single fill on the Precision Fill is limited to 3.8kg~ (or 2.3kg~ on Precision Fill Mini). The Scale Combine setting gets around this by splitting one large bucket into several smaller fills, which the machine then dispenses one after another without you needing to press anything between them.
Plan your numbers first. The total in each bucket is your fill weight multiplied by the number of combined fills. Choose a fill weight that divides evenly into your target and stays under the single fill limit. For example, 2.5kg combined four times gives you 10kg.
Check your bucket. Make sure the bucket can comfortably hold the full combined weight and sits steadily under the outlet before you start.
If at any point you are unsure or uncomfortable, stop and contact Technical Service before continuing.
Step 1 — Set Up the Recipe
Estimated time: less than 5 minutes | 1 person
Open the recipe you want to use and go to the target menu in recipe settings in System settings.
Set the fill weight to the amount for each individual fill. For a 10kg bucket, enter 2.5kg.
Find the Scale Combine (Scale CMB Times) setting and set it to the number of fills that make up one bucket. For a 10kg bucket at 2.5kg per fill, enter 4.
Step 2 — Fill Your First Bucket
Estimated time: Up to 5 minutes | 1 person
Place the empty bucket under the outlet.
Once the first fill has been weighed, press the foot pedal. The machine dispenses the first fill into the bucket.
The machine then weighs and dispenses the remaining fills on its own, three more in our 10kg example. You do not need to press the foot pedal between them. Keep the bucket in place until the last fill has dispensed.
Step 3 — Change Buckets and Repeat
Estimated time: Less than 1 minute per bucket change | 1 person
As soon as the last fill for the bucket has dispensed, the machine starts weighing the first fill for the next bucket and holds it, ready for you.
Remove the full bucket and place an empty one under the outlet.
Press the foot pedal. The machine dispenses the held fill and carries on with the rest of the fills automatically, just as before.
Repeat for each bucket in the batch.
What's Next
Once your large bucket recipe is set up, you can reuse it for every batch without changing the settings again.
If you're having issues, don't hesitate to get in touch with Technical Service.