Changing Lift Cycle Times
Steps on how to adjust parameters on the control box to change the lifting cycle time
Using the keypad on the LOGO! controller...
- Press down arrow until you see either a date/time code or the I/O monitor (grid of numbers)
- press the 'ESC' key on the bottom left.
- Use the up and down arrow keys to scroll to Program menu item. Press the green key on the bottom right to select.
- Select Set Parameter in the menu.
- Here you will be able to find the parameter that adjusts Cycle time.
On newer control boxes, this parameter is called Cycle Timer. On older control box's this might be called B001.
You'll see two parameters called TH and TL. You can use the green OK key, and the arrows to increase or decrease the time.
TH will be your loading time from coffee from your hopper to your cyclone. We recommend this around 35-45 seconds depending on your batch.
TL will be your unloading time from the cyclone to the hopper in your equipment. We recommend this around 8-10 seconds depending on your batch size.
TH will be your loading time from coffee from your hopper to your cyclone. We recommend this around 35-45 seconds depending on your batch.
TL will be your unloading time from the cyclone to the hopper in your equipment. We recommend this around 8-10 seconds depending on your batch size.