Skip to content
English
More support
Contact us
  • There are no suggestions because the search field is empty.

Changing lift cycle times

Steps on how to adjust parameters on the control box to change the lifting cycle time 

Using the keypad on the Logo! controller...
  1. Press down arrow until you see either a date/time code or the I/O monitor (grid of numbers)
  2. press the 'ESC' key on the bottom left.
  3. Use the up and down arrow keys to scroll to Program menu item. Press the green key on the bottom right to select.
  4. Select Set Parameter in the menu.
  5. Here the user will be able to find the parameter that adjusts cycle time.
On newer control boxes, this parameter is called Cycle Timer. On older control box's this might be called B001 or something similar.The giveaway is when selecting this parameter, there should be two (sometimes three) parameters to be edited. We only care about TH and TL.Use the keypad (arrow keys and green select key) to change the values as desired.
TH is the loading time in seconds.
TL is the unloading time in seconds.Once the changes are done, simply use the 'ESC' key to exit to the date/time or I/O screen.