Cleaning your Vacuums

Depending on your lift setup, you’ll have a canister vacuum or a vacuum box which will also need cleaning.

For standard vacuums, these are similar to standard home vacuums, where you’ll twist the bottom and empty the bag.

For Pump Boxes, these inside have a filter, and a cyclone that is similar to what you may have on your roaster. Undo the tri-clamp and discard whats in the container. For the filter on the top, undo the clamps, and in a well-ventilated area (ideally outside) and with a dust mask, used compressed air to clean the filter.

Both vacuums will need cleaning depending on the volume your outputting through them. Start with once a week and adjust as needed. The Pump Box filter can be cleaned when you notice a decrease in conveyance performance (or once a month).